New Unia VIS ON LAND S reversible plough
Šturovo7583 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+421 918 74...
Show
+421 918 741 507
Slovakia 
Germany, Kunde
6.8 m
Germany, Bordelum
2.5 m
Germany, 49688 Lastrup
3.2 m
Kyrgyzstan, Novopokrovka
€ 6033
DKK 45000
≈ $ 6921
Denmark, Sjælland
Germany, Coesfeld
Germany, Werl-Oberbergstraße
Germany, 49688 Lastrup
Germany, De-26899 Rhede-Brual
Austria, Redlham
4 m
Germany, Visbek-Rechterfeld
Germany, Meppen
- Suspension axle: ø70-965/ø50 mm
- 160 x 160 x 10 mm frame
- 8 + 8 LONG plough body with trashboard
- knife coulters
- skim coulters for crop residues
- NON-STOP 9-leaf spring protection (VIS ON LAND S)
- Variable, spot-adjustable working width: 37 / 43 / 49 / 55 cm per body
- Transport and support wheel, size 550/45x22.5
- ø480 mm coulter disc with spring protection
- Front support wheel 360/65-16
- Hydraulic adjustment of 1st plough body
- Hydraulic system for change of On-Land work mode into traditional in furrow ploughing mode
- Filter for hydraulic hose
- Getragene Version mit Anhängerachse Ø 70-965 / Ø50 mm
- Rahmen 160 x 160 x 10 mm
- 8 + 8 Pflugkörper BIG LONG
- Verlängerungsstange an jedem Pflugkörper
- Messerschneider
- NON-STOP Federsicherung - 9 Federn
- Vorderes Stützrad 360/65-16
- Arbeitsbreitenverstellung der Körper 37 / 43 / 49 / 55 cm
- Sechscheibe Ø 480 mm mit Federsicherung
- Transport - Stützrad 550/45-22,5
- Hydraulisches System zur Umstellung des Arbeitsmodus - von klassisch auf ON-LAND
- Hydraulische Einstellung des ersten Pflugkörpers
- Filter für Hydraulikschlauch
- Abstand zwischen den Körpern -105 cm
- Rahmenabstand - 80 cm
- Kraftbedarf - 260 - 340 PS
- Felfüggesztés ø70-965/ø50 mm
- Gerendaméret 160 x 160 x 10 mm
- 8 pár BIG LONG eketest előhántolóval
- Eketest hosszabbító minden egyes ekefejen
- Álandó - NON STOP- 9 szalagos laprugós védelem
- Első állítható mankókerék 360/65-16
- Változtatható munkaszélesség: 37 / 43 / 49 / 55 cm testenként
- ø480 mm tárcsás csoroszlya
- Transportkerék 550/45–22,5
- Hidraulikusan változtatható munkavégzési folyamat klasszikus szántástól ON-LAND szántásra
- Hidraulikusan állítható első eketest
- Hidraulikus tömlőszűrő
- Testtávolság 105 cm
- Gerenda magasság 80 cm
- Szükséges lóerő igény 260 - 340 LE
- Nesená verzia s osou závesu Ø 70-965 / Ø50 mm
- Konštrukcia rámu 160 x 160 x 10 mm
- 8 + 8 orebných telies BIG LONG s predplúžkami
- Predlžovacia lišta na každom orebnom telese
- Nožové krájadlá
- Istenie NON – STOP pružinové - 9 listových pier
- Predné oporné koleso s reguláciou 360/65-16
- Nastavenie pracovnej šírky korpusov 37 / 43 / 49 / 55 cm
- Krájací disk Ø 480 mm s pružinovým istením
- Prepravné - oporné koleso 550/45-22,5
- Hydraulický systém zmeny režimu práce – z klasického na ON-LAND
- Hydraulické nastavenie prvého orebného telesa
- Filter pre hydraulický obvod
- Vzdialenosť medzi korpusmi -105 cm
- Svetlá výška rámu - 80 cm
- Potrebný výkon traktora - 260 – 340 PS